Handy Industries Parts Washers

30 Gallon Drum Mounted Parts Washer

Galvanized steel tank for use with petroleum solvents or water-based solvents.

Features:
• 32"L x 24"W x 7-1/2"D Inside Tank
• Built to last for years of reliable service
• For use with petroleum solvents with a flash point over 100 degrees F
• Not to be used with chlorinated solvents
• Meets 0.75 freeboard requirements
• Galvanized drawn steel tank
• Durable, baked on powder coated epoxy finish
• Heavy-duty pump
• Single on/off switch for pump and optional light kit.
• "Stay-Put" flexible metal hose directs and holds power rinse where you want it with flow-thru brush
• Spring loaded door closure with 165 degree F fusible link
• Height: 63"
• Overall Width front to back: 34 1/2"
• Overall Length left to right:26 1/2"
• Inside Height: 7 1/2"
• Inside Width front to back: 24"
• Inside Length left to right: 32"
• Voltage: 115 VAC/60HZ/1PH
• Amps: 1A
• Weight 91 lbs.

30 Gallon Parts Washer

Designed for use in small engine repair and machine shops, service stations, industry, transmission and engine overhaul shops, and agricultural markets.

Features:
• 30-Gallon Capacity
• 35"L x 23-1/2"W x 16"D Inside Tank
• For use with petroleum solvents with a flash point over 100 degrees F
• Not to be used with chlorinated solvents
• Durable, baked on powder coated epoxy finish
• Heavy-duty metal stand and shelf.
• "Stay-Put" flexible metal hose directs and holds power rinse where you want it
• Screened sludge filter pad
• Removable inside cabinet shelf
• Optional metal parts basket
• Built-in drain with plug
• Spring loaded door closure with 165 degree F fusible link
• Weight: 160 lbs.
• Overall Width front to back: 24 1/2"
• Overall Length left to right: 35-3/8"
• Soaking Depth: 8 1/2"
• Working depth with shelf: 7"
• Inside Width fron to back: 23 1/2"
• Inside Length: 35"
• Voltage: 115VAC/60HZ/1PH
• Amps: 1A

45 Gallon Industrial Parts Washer

Galvanized steel tank for use with petroleum solvents or water-based solvents.

Features:
• For use with petroleum solvents with a flash point over 100 degrees F
• Not to be used with chlorinated solvents
• Filter screen filters out abrasive particles, protects pump, keeps solvents clean for extended cleaning power, lifts out for easy cleaning
• Durable, baked on powder coated epoxy finish
• Spring loaded door closure with 165 degree F fusible link "Stay-Put" flexible metal hose directs and holds power rinse where you want it
• Pistol-grip spray nozzle cleans and rinses parts easily. Located in an out-of-the-way position for more working area
• Parts basket
• Adjustable work shelves lift up and out and place on lower level, handy for deeper soaking
• 3/4" drain plug located on bottom front of the machine for easy draining
• Overall Height: 36"
• Overall Width (front to back): 44"
• Overall Length (left to right) 24"
• Soaking Depth: 9 1/2"
• Working depth with shelf: 9"
• Inside Width (front to back): 23"
• Inside Length (left to right): 45"
• Voltage: 115VAC/60HZ/1PH
• Amps: 1A
• Shipping weight: 175 lbs.

Electric Parts Washer

Fire-protective lid closure. For use with petroleum solvents with a flash point over 100 degrees F.

Features:
• Optional Rolling cart (model no. 13014)
• 5 gallon capacity
• 9" inside height
• 13" inside width (front to back)
• 25" inside lenght (left to right)
• Weight: 74 lbs.